I spent a good part of today going through the measurements of the wheelchair I am about to order after receiving feedback from specialists well-versed in customising wheelchairs in the CareCure forum. The specifications are close to being finalized. A big thank you to SCI_OTR and everyone who has given me valuable advice.
There are many factors to be considered to make a wheelchair good fitting and work like it should. The critical areas are seat depth, front and rear seat to floor heights, seat dump, seat back angle and centre of gravity. Each has to be right for me to be comfortably seated for the entire day, and for the chair to be well balanced and easy to push.
Most importantly, I need to get it right because it is going to cost me about US$3,000. The good thing about the TiLite ZRA Series 2 is that it is very adjustable. Minor mistakes in the measurements can be easily rectified. Still, I want it to be done properly in the factory to reduce the hassle of having to do adjustments it when it arrives.
Apart from the wheelchair, I am also ordering the Supracor Stimulite Classic cushion, an extra pair of wheels, spare spokes and inner tubes. The cushion is crucial for preventing pressure sores to the buttocks. The extra set of wheels is cheaper to buy separately than upgrading from the standard wheels provided with the chair.
I hope the TiLite ZRA Series 2 will last longer than the Max Pleasure Synergy that I have been using for the past three years. It will cost JPY25,000 to have the broken cross brace replaced, excluding shipping and other charges. This is equivalent to about RM970. I will just have the fractured tubed welded back later and use it as a spare chair.
Penang Trip 2 - Day 1 - 25 August 2013
Dealing with prejudices - Breaking Barriers - The Borneo Post - 26 October, 2013
Wonderful Wuan - Breaking Barriers - The Borneo Post - 19 October, 2013
My principles in life - Breaking Barriers - The Borneo Post - 12 October, 2013
Multiple benefits of accessible tourism - Breaking Barriers - The Borneo Post - 5 October, 2013